Floors:

Engineered floor joist ( wood I beam)
Central beam and perimeter with laminated wood
5/8 tongue-and-groove plywood, screwed and glued
Metal joist hangers
Basement jack post provided and installed

Exterior walls: thickness 9 7/8 `` R 40

Colonial style vinyl siding
1 x 3 strapping to ease exterior air
Building paper
3/8 plywood
2`` x 6`` kiln-dried studs at 16´´on center
R22 insulation
High density styrofoam with alumimum
1 x 3 strapping to ease interior air
1/2`` gypsum board

Roof R54

1/2`` gypsum board
Aluminium vapour barrier
3/8`` plywood
Engineered truss from kiln dried lumber at 24´´ on center
R12 + R40 insulation
1/2`` plywood
25 years shingles complete with eave protection
Facia and soffit
Ventilation system for roof

Electrical system

As per building code in effect
200 amp electrical panel complete with brakers for the modular portion
Superior insulation of electrical outlets
Smoke and carbon monoxyde detector at each floor level
Exterior receptable
Door chime
Kitchen hood
Heat recovery air exchanger with electrical system only

Plumbing:

Hot and cold water piping
Faucets for washing machine (optional)
Faucet for dish-washer (optional)
Supplementary pipe for future appliances in basement
One piece acrylic bath with pressure balance taps.
Stainless steel kitchen sink
Abs and copper
Inspection at factory.

Finition

Choice of vanities for bathroom
Choice of modern kitchen cupboards
Colonial style baseboards and casings
Colonial style interior doors
All P.V.C windows  with P.V.C. seals and  P.V.C. casings
Triple glaze Thermos Low-E argon for all our homes
P.V.C. Patio door
Blueprints for permits application